DIRECTIONS FOR USE
Allow the test cassette, specimen, buffer, and/or controls to equilibrate to room temperature (15-30 °C) prior to testing.
1. Collect about 500 μL of fresh ascites or hydrothorax samples, and ensure that the samples cannot be turbid or precipitated. If sticky tissue samples are present, centrifugation is recommended to get the supernatant or liquid portion.
2. Remove the cover of the tube containing the buffer.
3. Add 3 drops of fresh ascites or hydrothorax samples to the tube with the dropper.
4. Tighten the cap onto the specimen extraction tube and turn the solution upside down 4-5 times to thoroughly mix the solution well. Then unscrew the small cap.
5. Remove the test cassette from the sealed foil pouch and use it within one hour. Best results will be obtained if the test is performed immediately after opening the foil pouch.
6. Invert the extraction tube and add 4 drops of sample extraction (approx.100 μL) to the specimen well(S) and then start the timer.
7. Wait for the colored line(s) to appear. Read the result at 10 minutes. Do not interpret the result after 15 minutes
INTERPRETATION OF RESULTS
Positive: The presence of both C line and T line, no matter T line is clear or vague.
Negative: Only clear C line appears.
Invalid: No colored line appears in C zone, no matter whether T line appears.
Order Information
| Cat. No. | Product | Specimen | Pack |
| VIFCO-902 | FCoV Antigen Rapid Test | Ascites/Hydrothorax | 10T |
